Jump to year -> [1950-01-01] [1956-01-01] [1964-08-01] [1964-11-01] [1964-12-01] [1965-01-01] [1966-07-01] [1966-11-01] [1968-11-01] [1970-03-09] [1976-03-01] [1976-09-01] [1977-04-01] [1981-01-01] [1981-04-01] [1981-11-01] [1984-03-01] [1985-04-24] [1988-04-01] [1990-01-01] [1992-06-01] [1993-01-01] [1993-02-01] [1994-07-01] [1997-06-01] [2002-01-01] [2003-04-20] [2004-04-20] [2004-07-17] [2006-03-01] [2006-04-01] [2015-01-01] [2017-12-27]
[Topic]: Heat Transfer Documents

Documents below are listed chronologically. Use the links on the left or below to filter documents by keyword. Use the links above to jump to a specific year on this page.

Number of files: 214

    1950-01-01---------Jump to [Top]
  1. Dyke, J.M. - Selected Works, by J.M. Dyke, Individual Contributions, 1950-01-01. Doc type: Essay.
    Summary: John M. Dyke B.A.Sc., P.Eng: John was involved in steam generator design for 35 years, from 1945 to 1980. He lead the design team for the Pickering A nuclear station in the mid 1960s. They were the first with internal economizer and integral steam drums. The 48 steam generators at this four-reactor station have had exemplary performance. John obtained his B.A.Sc. in Mechanical Engineering from the University of Toronto in 1943 and joined the Royal Canadian Navy Volunteer Reserve as an Engineering Officer posted with the Royal Navy doing convoy duty in the Atlantic and the Mediterranean. When he returned to Canada he worked at the Naval Research Establishment in Halifax developing anti-acoustic torpedo gear. Coincidentally, these were parallel rods that vibrated in water streams. After the war John did steam boiler engineering at several firms and became Chief Engineer of Dominion Bridge’s new boiler department in 1958. Here he attended a special course on nuclear design and submitted bids for early nuclear steam generators and reheaters. In 1964 he joined Babcock and Wilcox Canada, first as a project engineer on fossil-fired boilers and then to head up the new nuclear steam generating section where they developed a new 500 MWe design for Pickering A. He is a registered professional engineer with the province of Ontario. He has been honored by the American Society of Mechanical Engineering as a life member for outstanding lifetime achievement. The Canadian Nuclear Association also honored him with their Outstanding Contribution Award for designing the steam generators used in CANDU stations. John retired from BWC in 1980.
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Design Operation [Audience] Engineer Grad Manager Technician Ugrad
    - Introduction Dyke-intro.pdf (291 kb)
  2. Simulation Software, by Wm.J. Garland, McMaster University, 1950-01-01. Doc type: Essay.
    Summary: Major endeavours such as a CANDU nuclear power plant involves extensive engineering calculations usually performed using large simulation tools.  However, to aid in conceptual BOE (back of envelope) evaluations and for education and training exercises, simplified and focused calculations are often done.  To aid students and working professional alike, a few such small tools (primarily spreadsheets) are linked below.  Go to Topics: Modelling to see the full list.
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology 30000 Reactor Steam Generators and Auxiliaries [Discipline] General Engineering Mechanical Engineering Nuclear Engineering [Topic] Basic Equations Conceptual Heat Transfer Modelling Process Systems Reactor Physics Thermalhydraulics [Phase] Concept Design Analysis [Audience] College Engineer Grad Technician Ugrad
    - SimulationSoftware.pdf (267 kb)
    3. 1956-01-01---------Jump to [Top]
  3. The Pressurized Water Reactor as a Source of Heat for Steam Power Plants, by J.M. Kay and F.J. Hutchinson, IMechE, 1956-01-01. Doc type: Paper.
    Summary: Published in the Proceedings of the Institution of Mechanical Engineers Volume 170 1956 pps 281 - 297
    Keywords: [Concept] - [SI] 09000 Special Studies [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Conceptual Heat Transfer Thermodynamics [Phase] Concept Design Operation [Audience] Engineer Ugrad Vendor
    - Published in the Proceedings of the Institution of Mechanical Engineers Volume 170 1956 pps 281 - 296 20054600.pdf (2333 kb)
    4. 1964-08-01---------Jump to [Top]
  4. Heat and Thermodynamics, Course 1-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 8. NEGS-TT1-2-5-1964.pdf (7809 kb)
  5. Heat and Thermodynamics, Course 2-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Ugrad
    - Full course, sections 1 to 10. NEGS-TT2-2-5-1964.pdf (3387 kb)
  6. Heat and Thermodynamics, Course 1-2.5, Nuclear Electric GS Technical Training Course, by D. Dueck, OPG, 1964-08-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Mechanical [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. NEGS-TT3-2-5-1964.pdf (4826 kb)
    7. 1964-11-01---------Jump to [Top]
  7. Turbine, Generator and Auxiliaries, Course 3-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 9 NEGS-TT3-3-4-1964.pdf (6102 kb)
  8. Turbine, Generator and Auxiliaries, Course 4-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 7 NEGS-TT4-3-4-1964.pdf (2375 kb)
    9. 1964-12-01---------Jump to [Top]
  9. Turbine, Generator and Auxiliaries, Course 2-3.4, Nuclear Electric GS Technical Training Course, by D.Dueck, OPG, 1964-12-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 10 NEGS-TT2-3-4-1964.pdf (7516 kb)
    10. 1965-01-01---------Jump to [Top]
  10. Turbine, Generator and Auxiliaries, Course 1-3.4, Nuclear Electric GS Technical Training Course, by Dick Dueck, OPG, 1965-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Mechanical [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full course, sections 1 to 7 NEGS-TT1-3-4-1965.pdf (4837 kb)
    11. 1966-07-01---------Jump to [Top]
  11. Heat and Thermodynamics, Course 1A25, Nuclear Training Course , by George Howie, OPG, 1966-07-01. Doc type: Course.
    Summary: Basic concepts of thermodynamics
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full course, sections 1 to 10. OH-1A25-1966.pdf (5569 kb)
    12. 1966-11-01---------Jump to [Top]
  12. Reactor, Boiler and Auxiliaries, Course 133, Nuclear Training Center, OPG, 1966-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 33000 Primary Heat Transport System [Discipline] Nuclear Engineering [Topic] Heat Transfer Reactor Physics Thermalhydraulics [Phase] Design [Audience] Engineer Technician
    - Full Course 20050900.pdf (10930 kb)
    - 133.00-00 Index, 20050901.pdf (252 kb)
    - 133.10-01 The Function of a Reactor, 20050902.pdf (262 kb)
    - 133.10-02 Reactor Classification - Fast and Thermal Reactors, 20050903.pdf (306 kb)
    - 133.10-03 Reactor Classification - Types of Thermal Reactors, 20050904.pdf (791 kb)
    - 133.10-04 Reactor Construction, 20050905.pdf (622 kb)
    - 133.20-01 Moderator Requirements, 20050906.pdf (227 kb)
    - 133.20-02 Moderator Materials Properties and Comparison, 20050907.pdf (459 kb)
    - 133.20-03 Moderator System and Equipment Considerations, 20050908.pdf (930 kb)
    - 133.30-01 Heat Transport Fluid Requirements, 20050909.pdf (401 kb)
    - 133.30-02 Heat Transport Fluid Comparisons, 20050910.pdf (600 kb)
    - 133.30-03 Main Circuit Considerations, 20050911.pdf (845 kb)
    - 133.30-04 Auxiliary Circuits, 20050912.pdf (708 kb)
    - 133.40-01 Reflector Systems, 20050913.pdf (367 kb)
    - 133.40-02 Shield Cooling Systems, 20050914.pdf (318 kb)
    - 133.50-01 Functions of Reactivity Mechanisms, 20050915.pdf (191 kb)
    - 133.50-02 Comparisons of Reactivity Mechanisms, 20050916.pdf (711 kb)
    - 133.62-01 Upgrading Requirements and Processes, 20050917.pdf (170 kb)
    - 133.62-02 Principles of Isotope Separation, 20050918.pdf (126 kb)
    - 133.62-03 The Distillation Upgrading Process, 20050919.pdf (258 kb)
    - 133.62-04 The Electrolytic Process, 20050920.pdf (149 kb)
    - 133.62-05 Common Problems, 20050921.pdf (183 kb)
    - 133.71-01 General Fuel Considerations, 20050922.pdf (190 kb)
    - 133.71-02 Fuel Preparation and Manufacture, 20050923.pdf (233 kb)
    - 133.71-03 Canadian Designs and Their Performance, 20050924.pdf (294 kb)
    - 133.91-01 Safety Standards and Safety Measures, 20050925.pdf (198 kb)
    - 133.91-02 Emergency Injection and Containment Systems, 20050926.pdf (160 kb)
    - 133.91-03 Safety System Performance, 20050927.pdf (199 kb)
    - 133.92-01Chemistry of Water Circuits, 20050928.pdf (940 kb)
    13. 1968-11-01---------Jump to [Top]
  13. Reactor Boiler and Auxiliaries, Course 433, Nuclear Training Centre, OPG, 1968-11-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 33000 Primary Heat Transport System [Discipline] Nuclear Engineering [Topic] Heat Transfer Reactor Physics Thermalhydraulics [Phase] Design [Audience] Engineer Technician
    - Full Course 20051200.pdf (1786 kb)
    - 433.00-00 Index, 20051201.pdf (241 kb)
    - 433.10-01 Nuclear Power, 20051202.pdf (121 kb)
    - 433.10-02 Power Reactor Construction, 20051203.pdf (179 kb)
    - 433.20-01 Moderator Systems, 20051204.pdf (141 kb)
    - 433.30-01 Heat Transport Systems, 20051205.pdf (239 kb)
    - 433.40-01 Auxiliary Circuits, 20051206.pdf (205 kb)
    - 433.50-01 Fuel, 20051207.pdf (247 kb)
    - 433.50-02 Fuel Handling and Storage, 20051208.pdf (172 kb)
    - 433.60-01 Boiler Steam and Water Systems, 20051209.pdf (291 kb)
    14. 1970-03-09---------Jump to [Top]
  14. Nuclear Heated Steam Generators, by D. J. Stelliga and J.M. Dyke, Babcock & Wilcox Canada, 1970-03-09. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - Presented to the Canadian Electrical Association, Toronto, Ontario, March 9-12, 1970 20053900.pdf (928 kb)
    15. 1976-03-01---------Jump to [Top]
  15. Canadian Power Reactor Fuel, by R.D. Page, AECL, 1976-03-01. Doc type: Report.
    Summary:
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology 37000 Fuel [Discipline] Materials Engineering Mechanical Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Design Description [Audience] College Engineer Technician Ugrad
    - AECL 5609, updated version of Lecture 14 of the 1974 Nuclear Power Symposium Series, doc#19720114 19760101.pdf (8580 kb)
    16. 1976-09-01---------Jump to [Top]
  16. Turbine, Generator and Auxiliaries, Course 134, Nuclear Training Centre, OPG, 1976-09-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051100.pdf (3779 kb)
    - 134.00-00 Index and Objectives, 20051101.pdf (355 kb)
    - 134.00-01 Turbine Theory, 20051102.pdf (793 kb)
    - 134.00-02 Turbine Operational Performance, 20051103.pdf (534 kb)
    - 134.00-03 Turbine Operational Problems, 20051104.pdf (554 kb)
    - 134.00-04 Turbine Start-Up, 20051105.pdf (365 kb)
    - 134.00-05 Factors Limiting Startup and Rates of Loading, 20051106.pdf (561 kb)
    - 134.00-06 Reliability and Testing Requirements, 20051107.pdf (253 kb)
    - 134.00-07 Maintenance, 20051108.pdf (404 kb)
    17. 1977-04-01---------Jump to [Top]
  17. Reactor, Boilers and Auxiliaries, Nuclear Training Course 133, OPG, 1977-04-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 33000 Primary Heat Transport System [Discipline] Nuclear Engineering [Topic] Heat Transfer Reactor Physics Thermalhydraulics [Phase] Design [Audience] Engineer Technician
    - Cover Page, Table of Contents, Basic Moderator Requirements 20041301.pdf (194 kb)
    - Moderator System & Equipment, 20041302.pdf (911 kb)
    - Basic Heat Transport Fluid Requirements, 20041303.pdf (274 kb)
    - Main Heat Transport Circuit Considerations, 20041304.pdf (1476 kb)
    - Auxiliary PHT System Features, 20041305.pdf (477 kb)
    - Shield Systems, 20041306.pdf (446 kb)
    - Annulus Gas System, 20041307.pdf (97 kb)
    - Containment Systems, 20041308.pdf (522 kb)
    - Reactivity Mechanisms, 20041309.pdf (233 kb)
    - Practical Reactivity Mechanisms, 20041310.pdf (161 kb)
    - Choice of Reactivity Mechanisms, 20041311.pdf (855 kb)
    - Fuel - Design and Manufacturing Features, 20041312.pdf (447 kb)
    - Fuel Performance and Operating Experience, 20041313.pdf (213 kb)
    18. 1981-01-01---------Jump to [Top]
  18. Memories of my Life as a Professional Engineer in the Royal Navy and the Canadian Boiler Industry, by J.M. Dyke, Individual Contributions, 1981-01-01. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - Fran Gregory, Ed 20054000.pdf (2139 kb)
    19. 1981-04-01---------Jump to [Top]
  19. Thermal-Hydraulics in Recirculating Steam Generators: Thirst Code User's Manual, by M.B. Carver, AECL, 1981-04-01. Doc type: Report.
    Summary: THIRST is for modeling ThermalHydraulics In Recirculating Steam generators. This manual gives complete details of the mathematical derivation and numerical solution of the 3D, 2Phase thermalhydraulic equilibrium conservation equations inside a reactor boiler and also explains the many constitutive correlations required. Finally the manual fully defines the immense amount of input detail required to model the primary side heat transfer and the secondary side water boiling and recirculating in the complex tube-in-shell geometry of a prototypical CANDU steam generator.
    Keywords: [Concept] - [SI] 03000 Engineering Science and Technology 36000 Steam Generator Steam and Water Systems [Discipline] Mathematics#Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Modelling Process Systems Thermalhydraulics [Phase] Design Analysis Safety Analysis [Audience] Engineer Grad
    - AECL 7254, April 1981 THIRSTusersR43667.pdf (2290 kb)
    20. 1981-11-01---------Jump to [Top]
  20. Heat and Thermodynamics, Course 125, Nuclear Training Centre, OPG, 1981-11-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050100.pdf (6328 kb)
    - Module B.7 Course Procedures, 20050101.pdf (302 kb)
    - Module B.6 Basics, 20050102.pdf (339 kb)
    - Module B.5 Steam Tables, 20050103.pdf (740 kb)
    - Module B.4.2 Entropy, Throttling and Molier Diagram, 20050104.pdf (904 kb)
    - Module B.4.1 Turbine With Reheat, 20050105.pdf (684 kb)
    - Module B.3.2 Feedheater Operation, 20050106.pdf (569 kb)
    - Module B.3.1 Condenser Performance, 20050107.pdf (594 kb)
    - Module B.2 Steam Generator, 20050108.pdf (477 kb)
    - Module B.1 Reactor, 20050109.pdf (826 kb)
    - B.6 Self Evaluation, 20050110.pdf (87 kb)
    - B.5 Self Evaluation, 20050111.pdf (69 kb)
    - B.4.2 Self Evaluation, 20050112.pdf (118 kb)
    - B.4.1 Self Evaluation, 20050113.pdf (103 kb)
    - B.3.2 Self Evaluation, 20050114.pdf (121 kb)
    - B.3.1 Self Evaluation, 20050115.pdf (118 kb)
    - B.2 Self Evaluation, 20050116.pdf (137 kb)
    - B.1 Self Evaluation, 20050117.pdf (102 kb)
    - Criterion Tests, 20050118.pdf (134 kb)
    21. 1984-03-01---------Jump to [Top]
  21. Heat and Thermodynamics, Course PI 25, Nuclear Training Centre, OPG, 1984-03-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: expansion and contraction, heat transfer, pressure control, Mollier diagrams, efficiency, the CANDU cycle.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20050200.pdf (3028 kb)
    - 25-0 Introduction and Course Procedures, 20050201.pdf (336 kb)
    - 25-1 Basics, 20050202.pdf (471 kb)
    - 25-2 Expansion and Contraction, 20050203.pdf (351 kb)
    - 25-3 Heat Transfer Calculations, 20050204.pdf (183 kb)
    - 25-4 Pressure Control, 20050205.pdf (200 kb)
    - 25-5 Mechanisms of Heat Transfer, 20050206.pdf (144 kb)
    - 25-6 Mollier Diagrams and The Turbine Process, 20050207.pdf (679 kb)
    - 25-7 Efficiency and The CANDU Cycle, 20050208.pdf (298 kb)
    - 25-8 Criterion Tests, 20050209.pdf (105 kb)
    - 25-9 Self Evaluation Answer Sheet, 20050210.pdf (309 kb)
    22. 1985-04-24---------Jump to [Top]
  22. CANDU 6 Heat balance, by Wm.J. Garland, McMaster University, 1985-04-24. Doc type: Other.
    Summary: CANDU 6 heat balance / power calculation based on measured temperatures, pressures and flows, with error propagation estimates.
    Keywords: [Concept] - [SI] 30000 Reactor Steam Generators and Auxiliaries [Discipline] Nuclear Engineering [Topic] Conceptual; #Heat Transfer; #Modelling; #Process Systems [Phase] Concept; #Design [Audience] College; #Engineer; #Grad; #Manager; #Technician; #Ugrad
    - CANDU2.xls (88 kb)
    23. 1988-04-01---------Jump to [Top]
  23. Heat and Thermodynamics, Course 225, Nuclear Training Centre, OPG, 1988-04-01. Doc type: Course.
    Summary: Basic concepts of heat and thermodynamics: steam tables, Mollier diagrams, turbine with reheat, feedheater, condenser, steam generator, reactor.
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Full Course 20043100.pdf (4667 kb)
    - Index, 20043101.pdf (208 kb)
    - Module 1 Basics, 20043102.pdf (404 kb)
    - Module 2 Steam Tables, 20043103.pdf (636 kb)
    - Module 3 Entropy, Throttling and Mollier Diagrams, 20043104.pdf (701 kb)
    - Module 4 Turbine with Reheat, 20043105.pdf (611 kb)
    - Module 5 Feedheater Operation, 20043106.pdf (511 kb)
    - Module 6 Condenser Performance, 20043107.pdf (546 kb)
    - Module 7 Steam Generator, 20043108.pdf (382 kb)
    - Module 8 Reactor, 20043109.pdf (710 kb)
    24. 1990-01-01---------Jump to [Top]
  24. Turbine and Auxiliaries, Course PI 34 / TIMS Ref. PI 3004, Nuclear Training Centre, OPG, 1990-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Full Course 20051000.pdf (11938 kb)
    - PI 34.00-00 Index and Objectives, 20051001.pdf (619 kb)
    - 334.00-01 The Steam Turbine, 20051002.pdf (676 kb)
    - 234.00-01 Turbine Construction, 20051003.pdf (1037 kb)
    - 334.00-03 The Steam System, 20051004.pdf (517 kb)
    - 234.00-02 Steam Control to the Turbine, 20051005.pdf (514 kb)
    - 334.00-07 The Condenser, 20051006.pdf (476 kb)
    - PI 25-06 The Mollier Diagram and the Turbine Processes, 20051007.pdf (1214 kb)
    - 334.00-08 Feedwater Heating System -1, 20051008.pdf (212 kb)
    - 334.00-09 Feedwater Heating System -2, 20051009.pdf (307 kb)
    - 234.00-07 Feedwater Control and Operation, 20051010.pdf (586 kb)
    - PI 24.21-01 Secondary Heat Transport System - Impurities, 20051011.pdf (230 kb)
    - PI 24.21-02 Chemical Additives and Blowdown, 20051012.pdf (274 kb)
    - PI 25-07 Efficiency of the CANDU Turbine Cycle, 20051013.pdf (513 kb)
    - 234.00-03 Steam Valve Hydraulic Control, 20051014.pdf (255 kb)
    - 234.00-04 Governor Operation, 20051015.pdf (516 kb)
    - 234.00-05 Turbine Governors, 20051016.pdf (677 kb)
    - 334.00-10 The Lubricating Oil System, 20051017.pdf (275 kb)
    - 334.00-11 The Turning Gear, 20051018.pdf (113 kb)
    - 234.00-06 Turbine Operational Problems, 20051019.pdf (568 kb)
    - 234.00-08 Factors Limiting Startup and Rates of Loading, 20051020.pdf (887 kb)
    - 334.00-13 appendix 1 Ontario Hydro Nuclear Turbine Types, 20051021.pdf (245 kb)
    25. 1992-06-01---------Jump to [Top]
  25. Reactor Boiler and Auxiliaries, Course 233, Nuclear Training, OPG, 1992-06-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 33000 Primary Heat Transport System [Discipline] Nuclear Engineering [Topic] Heat Transfer Reactor Physics Thermalhydraulics [Phase] Design [Audience] Engineer Technician
    - Full Course 20053800.pdf (13185 kb)
    - Abstract and Table of Contents, 20053801.pdf (162 kb)
    - Module 0 - Introduction, 20053802.pdf (269 kb)
    - Module 1 - Moderator Heavy Water, 20053803.pdf (359 kb)
    - Module 2 - Moderator Circulation System, 20053804.pdf (418 kb)
    - Module 3 - Moderator Cover Gas System, 20053805.pdf (387 kb)
    - Module 4 - The Moderator Liquid Poison System, 20053806.pdf (578 kb)
    - Module 5 - The Moderator Purification System, 20053807.pdf (486 kb)
    - Module 6 - HTS Heat Sources and Heat Transfer Paths, 20053808.pdf (362 kb)
    - Module 7 - HTS Pressure and Inventory Control, 20053809.pdf (1482 kb)
    - Module 8 - Heat Transport System Shutdown Operation, 20053810.pdf (609 kb)
    - Module 9 - HTS Heavy Water, 20053811.pdf (602 kb)
    - Module 10 - Heat Transport System Auxiliaries, 20053812.pdf (755 kb)
    - Module 11 - Shutdown Systems, 20053813.pdf (704 kb)
    - Module 12 - Emergency Coolant Injection, 20053814.pdf (663 kb)
    - Module 13 - Containment, 20053815.pdf (1004 kb)
    - Module 14 - Annulus Gas System, 20053816.pdf (407 kb)
    - Module 15 - Shield Cooling Systems, 20053817.pdf (528 kb)
    - Module 16 - Fuel Performance, 20053818.pdf (751 kb)
    - Module 17 - Fuel Handling, 20053819.pdf (616 kb)
    - Module 18 - Unit Upsets, 20053820.pdf (1950 kb)
    26. 1993-01-01---------Jump to [Top]
  26. Principes de Science et de Fonctionnement des Réacteurs - Chaleur et Thermodynamique, CNSC, 1993-01-01. Doc type: Course.
    Summary:
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Chaleur et Thermodynamique 20070900.pdf (850 kb)
    27. 1993-02-01---------Jump to [Top]
  27. Reactor, Boiler and Accessories, Course 233, OPG, 1993-02-01. Doc type: Course.
    Summary: Table of contents and Objectives for Course 233, Reactor, Boiler, and Auxiliaries.
    Keywords: [Concept] - [SI] 33000 Primary Heat Transport System [Discipline] Nuclear Engineering [Topic] Heat Transfer Reactor Physics Thermalhydraulics [Phase] Design [Audience] Engineer Technician
    - Table of Contents and Objectives 20042200.pdf (640 kb)
    - 233.20-1 Moderator and Main Moderator System, 20042201.pdf (485 kb)
    - 233.20-2 Moderator Purification, 20042202.pdf (241 kb)
    - 233.20-3 Moderator Cover Gas System, 20042203.pdf (202 kb)
    - 233.20-4 Moderator D2O Collection, 20042204.pdf (117 kb)
    - 233.20-5 Moderator Liquid Poison System, 20042205.pdf (343 kb)
    - 233.30-1 Heat Transport D2O and Heat Transport Main System, 20042206.pdf (284 kb)
    - 233.30-2 Heat Transport Pressurizing System, 20042207.pdf (277 kb)
    - 233.30-3 Heat Transport Purification, 20042208.pdf (235 kb)
    - 233.30-4 Heat Transport Gland Seal Circuit, 20042209.pdf (165 kb)
    - 233.30-5 Heat Transport Shutdown Cooling, 20042210.pdf (144 kb)
    - 233.30-6 Heat Transport Maintenance Cooling System, 20042211.pdf (56 kb)
    - 233.30-7 Heat Transport H2 Addition, 20042212.pdf (132 kb)
    - 233.30-8 Heat Transport Pressure Relief, 20042213.pdf (204 kb)
    - 233.30-9 Heat Transport D2O Collection, 20042214.pdf (100 kb)
    - 233.30-10 Heat Transport D2O Recovery, 20042215.pdf (113 kb)
    - 233.30-11 Emergency Coolant Injection System, 20042216.pdf (197 kb)
    - 233.30-12 Heat Sources and Transfer Paths, 20042217.pdf (271 kb)
    - 233.40-1 Shield Cooling Systems, 20042218.pdf (250 kb)
    - 233.40-2 Containment System, 20042219.pdf (462 kb)
    - 233.40-3 Annulus Gas System, 20042220.pdf (95 kb)
    - 233.60-1 Steam Supply System, 20042221.pdf (383 kb)
    - 233.70-1 Fuel Design and Manufacturing Features, 20042222.pdf (377 kb)
    - 233.70-2 Fuel Performance and Operating Features, 20042223.pdf (521 kb)
    28. 1994-07-01---------Jump to [Top]
  28. Turbine and Auxiliaries, Nuclear Training Course 234, OPG, 1994-07-01. Doc type: Course.
    Summary:
    Keywords: [Concept] - [SI] 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermodynamics [Phase] Design Operation [Audience] College Engineer Technician Ugrad
    - Module 234-00 Introduction to the Course 20042400.pdf (182 kb)
    - Module 234-01 The Steam Turbine, 20042401.pdf (760 kb)
    - Module 234-02 The Boiler, 20042402.pdf (851 kb)
    - Module 234-03 The Main Steam System, 20042403.pdf (1399 kb)
    - Module 234-04 Auxiliary Steam Systems, 20042404.pdf (684 kb)
    - Module 234-05 The Condenser and its Auxiliary Systems, 20042405.pdf (1091 kb)
    - Module 234-06 The Condensate, the Boiler Feed and Their Auxiliary Systems, 20042406.pdf (1736 kb)
    - Module 234-07 The Turbine Governing System, 20042407.pdf (724 kb)
    - Module 234-08 The Turbine Supervisory System, 20042408.pdf (273 kb)
    - Module 234-09 The Turning Gear, 20042409.pdf (305 kb)
    - Module 234-10 The Turbine Lubricating System, 20042410.pdf (503 kb)
    - Module 234-11 Startup and Loading, 20042411.pdf (1220 kb)
    - Module 234-12 Unloading and Shutdown, 20042412.pdf (333 kb)
    - Module 234-13 Special Modes of Operation and Accidents, 20042413.pdf (895 kb)
    - Module 234-14 Turbine Operational Problems, 20042414.pdf (850 kb)
    29. 1997-06-01---------Jump to [Top]
  29. Steam Generators for CANDU, Engineering Memoirs, by J.M. Dyke, Individual Contributions, 1997-06-01. Doc type: Essay.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20054100.pdf (19 kb)
    30. 2002-01-01---------Jump to [Top]
  30. Heat and Thermodynamics Course, CNSC, 2002-01-01. Doc type: Course.
    Summary: This module covers the following areas pertaining to thermodynamics: Introduction, Heat and Thermodynamics - The Basics, Reactor and Heat Transport System Normal Operation, Heat Transport System Component Operation
    Keywords: [Concept] Heat and Thermodynamics [SI] 30000 Reactor, Steam Generators and Auxiliaries 40000 Turbine, Generator and Auxiliaries [Discipline] Mechanical Engineering [Topic] Fluid Mechanics Heat Transfer Thermalhydraulics [Phase] Concept Design Design Analysis [Audience] College Engineer Ugrad
    - Cover Page 20030900.pdf (83 kb)
    - , 20030901.pdf (647 kb)
    - Presentation, 20030902.pdf (1557 kb)
    31. 2003-04-20---------Jump to [Top]
  31. Fretting in Nuclear Steam Generators - A New Approach, by J.M. Dyke, Individual Contributions, 2003-04-20. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 11th International Conference on Nuclear Engineering, Tokyo, Japan 20054500.pdf (2821 kb)
    32. 2004-04-20---------Jump to [Top]
  32. The Role of Two-Phase Coolant in Moderating Fretting in Nuclear Steam Generators, by J.M. Dyke, Individual Contributions, 2004-04-20. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 12th International Conference on Nuclear Engineering, Washington, DC 20054201.pdf (1714 kb)
    - Associated Presentation, by J.M. Dyke, 20054202.pdf (1558 kb)
    33. 2004-07-17---------Jump to [Top]
  33. CANDU Primary Heat Transfer System Heat Duty Diagram - analytic solution, by Wm.J. Garland, McMaster University, 2004-07-17. Doc type: Other.
    Summary: CANDU Primary Heat Transfer System Heat Duty Diagram - simplified analytical calculation.
    Keywords: [Concept] - [SI] 33100 Main Heat Transport Syste 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering [Topic] Basic Equations Heat Transfer Modelling Process Systems [Phase] Concept Design Analysis [Audience] College; #Engineer; #Grad; #Manager; #Technician; #Ugrad
    - linear1.xls (333 kb)
  34. CANDU Primary Heat Transfer System Heat Duty Diagram - numeric solution, by Wm.J. Garland, McMaster University, 2004-07-17. Doc type: Other.
    Summary: CANDU Primary Heat Transfer System Heat Duty Diagram simplified numerical calculation .
    Keywords: [Concept] - [SI] 33100 Main Heat Transport Syste 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering [Topic] Basic Equations Heat Transfer Modelling Process Systems [Phase] Concept Design Analysis [Audience] College; #Engineer; #Grad; #Manager; #Technician; #Ugrad
    - numeric1.xls (377 kb)
  35. CANDU fuel channel 1-D temperature calculation, by Wm.J. Garland, McMaster University, 2004-07-17. Doc type: Other.
    Summary: CANDU fuel channel 1-D temperature calculation spreadsheet.
    Keywords: [Concept] - [SI] 33100 Main Heat Transport System [Discipline] Nuclear Engineering [Topic] Heat Transfer Modelling [Phase] Design Analysis [Audience] College; #Engineer; #Grad; #Manager; #Technician; #Ugrad
    - channel1 (511 kb)
    36. 2006-03-01---------Jump to [Top]
  36. Fretting Failures in Early Canadian Nuclear Steam Generators, by J.M. Dyke and Wm.J. Garland, CANTEACH, 2006-03-01. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20060201.pdf (140 kb)
    37. 2006-04-01---------Jump to [Top]
  37. Evolution of CANDU Steam Generators – A Historical View, by J.M. Dyke and Wm.J. Garland, CANTEACH, 2006-04-01. Doc type: Paper.
    Summary:
    Keywords: [Concept] - [SI] 36000 Steam Generator Steam and Water Systems [Discipline] Mechanical Engineering Nuclear Engineering [Topic] Heat Transfer Thermalhydraulics [Phase] Concept Design Operation [Audience] Engineer
    - 20060101.pdf (702 kb)
    38. 2015-01-01---------Jump to [Top]
  38. The Essential CANDU, by Wm.J. Garland, Editor-in-Chief, UNENE, 2015-01-01. Doc type: Book.
    Summary: The Essential CANDU is a textbook about nuclear science and engineering pertaining to CANDU reactors using CANDU as the reference design. This distinguishes it from comparable textbooks based on PWR reactors. This is not a product description of CANDU per se. The book emphasizes theory over other aspects of nuclear science. This is a textbook about CANDU nuclear reactor and power plant engineering, not just the reactor physics of the core.
    Keywords: [Concept] General [SI] 30000 Reactor, Steam Generators and Auxiliaries 35000 Fuel Transfer and Storage 36000 Steam Generator Steam and Water Systems 37000 Fuel 40000 Turbine, Generator and Auxiliaries 60000 Instrumentation and Control [Discipline] Chemistry General Engineering Health Physics Nuclear Engineering [Topic] Corrosion Fluid Mechanics Fuel Management Heat Transfer Important Parameters Physical Description Process Systems Radiation Reactor Physics Safety Thermalhydraulics Thermodynamics Waste Handling [Phase] Design Design Analysis Design Description Design Evolution Safety Safety Analysis [Audience] Engineer Grad Ugrad
    - A textbook on the CANDU nuclear power plant technology. press_release-Jan2016.pdf (382 kb)
    39. 2017-12-27---------Jump to [Top]
  39. Canada's Power Reactor Fuel Bundle Design and Development, by R.D. Page and A.J. Langdon, AECL, 2017-12-27. Doc type: Other.
    Summary: This pictorial record of Canada's power reactor fuel bundles was prepared to historically record the evolution of the power reactor fuel over the years. No one report issued over the years has been able to describe in detail the various changes that these pictures portray. It should be noted that the record does not include WR-1 type fuel or special irradiation of assemblies. "A picture speaks a thousand words". Full resolution versions of the images contained in this document can be found in the Image Library of CANTEACH web site http://canteach.candu.org listed under the System Index (SI) 37000 - Fuel.
    Keywords: [Concept] - [SI] 37000 Fuel [Discipline] Materials Engineering Mechanical Engineering [Topic] Chemistry Fluid Mechanics Heat Transfer Physical Description Thermalhydraulics [Phase] Concept Design Design Evolution [Audience] College Engineer Grad High Manager Technician Ugrad
    - Historical and Pictorial Record FuelStory.pdf (355 kb)
---end of page---